To change the user code on your Schlage lock, follow these steps:

1. Locate Your Programming Code: This 6-digit code is essential for making changes to your lock. It’s typically found on the back of the lock or in the user manual.
2. Enter Programming Mode:
   • Press the Schlage button.
   • Enter your 6-digit programming code. The Schlage button will flash and beep three times, indicating you’re in programming mode.
3. Add a New User Code:
   • Press the Schlage button again.
   • Press the number 1.
   • Enter your desired new 4-digit user code.
   • Re-enter the same 4-digit code to confirm.
   • If successful, the Schlage button will flash green and beep once.
4. Delete an Existing User Code:
   • Press the Schlage button.
   • Press the number 2.
   • Enter the 4-digit code you wish to delete.
   • Re-enter the same code to confirm.
   • If successful, the Schlage button will flash green and beep once.
5. Change the Programming Code:
   • Press the Schlage button.
   • Press the number 3.
   • Enter a new 6-digit programming code.
   • Re-enter the new programming code to confirm.
   • If successful, the Schlage button will flash green and beep once.

Note: Ensure the door is open while programming to prevent accidental lockouts.

For a visual guide, you can watch the following video: